|
The Disk Copy Stand (CRF2535) is a high speed, low cost, stand alone hard drive duplicator. This Japanese-made product offers native cross copy capablity for SATA, eSATA and USB drives. ATA (IDE) drives can be connected via the optional interface packs. In addition to the copy facilities it includes utility functions such as Low Level Format, 1, 3, 7 pass Secure Erase functions and a Disk Verify function with bad sector repair.
Disks can also be connected to a PC or Mac via either SATA, eSATA or USB ports.
No PC required to clone disks!
|
ATA/IDE Interface Packs
(connects via the eSATA ports)
To test or duplicate an IDE drive(SATA<>IDE, eSATA<> IDE, USB<>IDE) you must purchase this pack
To copy between two IDE (IDE<>IDE)drives you must also purchase this pack
|
Overview
-
-
Works for any make of drive.
-
Supports SATA 3.5 and 2.5 drives without cables.
- Cross copy facility
Sector-to-Sector Copy for producing identical Hard Drive duplicates
-
CRC Compare (Cyclic Redundancy Check) to verify every copied sector data and ensure a 0% Error Rate
-
Hard Drive Verify function with repair option for fast and easy quality assurance testing
-
Data Erase functions for secure data scrubbing 1, 3, or 7 times overwrite.
Disk Copy Stand (CRF 25/35) Duplicator/Wiper
What's in the box?
IDE/ATA Interface Packs
To copy IDE/ATA hard disks you must purchase the optional interface packs.
These allow connection of an IDE/ATA 3.5" drive (other sizes by use of the appropriate converter - not supplied) to the front eSATA ports of the CRF2535.
The CRF2535 IDE_ATA Pack (one drive) allows connection of one IDE/ATA drive and contains:
eSATA- SATA cable
SATA-IDE converter
Disk drive mains power supply
Mains cable
TheCRF2535 IDE_ATA Second Drive Pack allows connection of a second IDE/ATA drive and contains:
eSATA- SATA cable
SATA-IDE converter
NOTE: There are NO hard disks included with the Disk Copy Stand (CRF 25/35) Duplicator/Wiper
Expodata can not guarantee that the Disk Copy Stand (CRF 25/35) Duplicator/Wiper will work in all environments. Please contact us for questions concerning compatibility |
Specifications (for the nerd in you)
-
Interface : USB Rev 2.0
-
USB Connection : Type B
-
Weight : Approx. 360g
-
Dimensions : W150mm x D143mm x H70mm
-
Optimal Operating Temperature/Humidity : Temp 5~35 degrees C., Humidity 20~80% (RH non-condensing), and within the specified environment limits of the attached PC
Supported Windows Operating Systems
-
Windows 98 SE, Windows 2000, Windows Me, Windows XP, Windows Vista
-
Windows 3.1, Windows 95, Windows NT, Windows 98 Original Edition are not supported.
Supported Mac OS Versions
USB System Requirements
Windows
-
USB 2.0 Connection
-
USB 1.1 Connection (Data transfer limited to USB 1.1 specification)
-
Pentium 300MHz with at least 128MB RAM
-
For any driver or bundled application installation a CD-ROM or floppy disk drive may be neccessary
Supported Operating Systems
Unsupported USB Systems
-
Windows 95/Windows 3.x/Windows NT/Mac OS 9.x and earlier are not supported.
-
Computers that were sold prior to the release of Windows 98 that have USB ports may not operate properly.
-
Some laptops featuring the AMD K6 CPU may not be supported at this time.
- NOTE: There are NO hard disks included with the Disk Copy Stand (CRF 25/35) Duplicator/Wiper
- Expodata can not guarantee that the Disk Copy Stand (CRF 25/35) Duplicator/Wiper will work in all environments. Please contact us for questions concerning compatibility
|
