LanSpectre PRO

The new LanSpectre PRO is designed to simplify the task of detecting and documenting attached network devices.

LanSpectre PRO automatically scans the entire the network in seconds and collects Device Names, IP Addresses and MAC Addresses. It also categorises devices under headings PC/Server, Printer, Router/Switch or miscellaneous.

Once discovered, correct operation of attached devices can be verified using the powerful inbuilt PING feature. No need to input the IP address, just select the device from the list and hit PING.

LanSpectre PRO can be left connected to the network then accessed remotely via the web browser. Then simply saving the captured file  creates a database of all network attached devices in an HTML or Excel .csv format.

• Ethernet 10/100, RJ-45 connection
• Software upgradeable via the    internet
• Scans through 255 addresses within the same subnet
• Scans new subnet if new addresses appear
• Displays Netbios,  SNMP-names, Group, IP and MACaddress
• Presents active services as DHCP, http, Telnet, SNMP, routing and printing
• Simple functionality test for cabling 
• Microprocessor
• LCD-display
• Automatic power down
• HTTP-server  

FrameScope Pro

• Supports 802.3z-compliant 10/100/1000BASE-T copper and
• 1000BASE-SX/LX/ZX gigabit fiber SFP interfaces.
• RFC 2544 performance benchmarking verifies throughput at full line rate on both copper and fiber Ethernet interfaces at speeds from 1 Mbit/s to 1 Gbit/s.
• Autotest application performance testing allows for quick isolation of protocol, configuration and resource performance problems.
• Automatic Network Discovery simplifies use and documents network resources and stations
• Remote control via any web browser allows troubleshooting, monitoring, and reporting from central office, eliminating costly dispatches
• Configurable VLAN and QoS settings
• Full-screen, color LCD displays clear and complete results
• Touch-screen interface and online manuals enhance ease of use.

FrameScope 350

• First-of-its-kind innovative performance test suite that measures & rates the response times of key network resources such as web, file, e-mail, print DNS and DHCP servers.
• Verifies performance of vital network services as well as full Category 6 cable certification
• Complete network testing that quickly isolates protocol, configuration, performance and cabling problems
• Network discovery lets users survey the network and generate a complete list of workstations, switches, routers, servers and other network devices Remote control through a web browser allows operation from location on the network
• Detailed network test reports via the web interface and the included ScopeData Pro software produces graphical cable test reports
• Easy to use color touch screen interface minimizes training requirements
• New Firmware RFC2544 Compliant

LanMaster 35

The new LanMaster 35 Power and Link Tester is the first full featured PoE (Power over Ethernet) and 10/100/1000BaseTX Link tester.

LanMaster 35 features PoE measurement with actual loads to verify required power is available before connecting a powered device such as a VoIP phone or wireless access point. The unit identifies the power configuration as End-span, Mid-span or All-span and the type of power as IEEE 802.3af, Cisco Pre-Standard or Non-Standard. A Link resistance measurement feature helps to identify cabling problems.

LanMaster 35 also tests 10/100/1000 BaseTX Links providing the speed and duplex mode for the Link.  In addition, the tester includes Tone Generation for cable tracing, TDR length measurement, and Port Identification to provide a complete suite of LAN test functions.

LanMaster 35 provides essential PoE and Link testing capabilities in a low cost handheld tester. The optional CableTracker 15 Tone Tracing Probe works with the LanMaster 35 Tone Generator feature to trace cables or locate connected punchdowns.

Features

• Tests network cable pairs for Power over Ethernet (PoE)
• Identifies the power type as IEEE 802.3af, Cisco Inline or Non-Standard
• Makes power measurements with loads simulating actual powered devices
• Displays voltage and polarity for wire pairs and power configuration as End-span, Mid-span or All-span
• Identifies damaged cables and bad punchdowns by measuring Link Resistance
• Detects 10/100/1000 BaseTX Link speed and duplex mode
• Measures cable length and open or short conditions
• Provides Port ID function (link light activation) for identifying connected ports
• Applies a tone signal for tracing cables with the CT15 CableTracker Tone Probe

LanMaster30

Testing unused outlets can identify telephone lines and hub/switch ports available for reassignment. The LANMASTER 30 is an essential tool for maintaining networks containing both Ethernet and Token Ringdevices. Standard Ethernet or Fast Ethernet Links are identified and equipment support for 10/100 Auto-negotiation is displayed.

Token Ring testing includes insertion into the ring and measuring required current levels. Telecom systems and LANs can now be supported with a single tool.

Protect Equipment from Damage by Testing Outlet before Connecting a Device

• Verify Connectivity to Far-End Equipment
• Identify Type of LAN Connection 
• Ethernet, Fast Ethernet or Token Ring
• Identify Type of Telecom Connection 
• Analog, PBX or ISDN
• Locate Unused/Disconnected Outlets
• Provides Installers and Maintainers a tool to quickly test that an outlet is live and identify the type of telecom or LAN equipment connected to the outlet. Connecting equipment to an unknown outlet can damage the installed device due to incompatible voltage and current levels. The
• Model 30 reduces time spent on Moves, Adds and Changes (MACs) by verifying physical layer connectivity to the far-end equipment.

LanMaster 26

The most advanced Link Tester available, the new LanMaster 26 features Gigabit over copper Link testing capability and VoIP/PoE detection. The Model 26 even measures the voltage supplied by the VoIP or PoE port with typical loading to ensure that the voltage level is adequate. After verifying correct power is available, the LanMaster 26 tests a VoIP or PoE port to determine the speed and duplex mode. The Port ID feature identifies which port on a hub or switch that a wall outlet is connected by flashing the Link light on the connected port. The LanMaster 26 provides critical network connectivity and configuration information needed to maintain and troubleshoot a LAN at an affordable price.

• Verifies Connectivity for 10/100/1000 BaseTX Links
• Identifies VoIP (Voice over IP) and PoE (Power over Ethernet) Ports 
• Measures Port Voltage to Ensure Proper Voltage Level and warns of low voltage levels 
• Identifies Speed, Duplex Mode and Auto-negotiation for
• 10/100/1000/VoIP/PoE Ports 
• Provides Port Identification Function (Link Light Activation) 
• Identifies Connection as LAN, NIC or Auto Crossover 

Pinger Plus

Connect Pinger Plus and the inbuilt DHCP client will automatically configure the tester for immediate use on your network. Immediately begin PINGing local or remote IP devices with the first tester to provide Gigabit over copper link testing.

Use the powerful PING range feature to find available IP address.

The Profile feature allows up to eight different test setups (including source and destination IP address, subnet mask and gateway address) to be pre-programmed. Having Profiles allows a user to quickly test large networks with multiple VLANs.

The Pinger Plus also identifies reversed polarity for improperly connected wire pairs and provides a Port Identification feature with selectable blink rates to identify which port on a hub or switch that a wall outlet is connected.

Pinger Plus is essential for the smooth operation todays networks

• Detect and Decode 10/100/1000 Link Signals
  
• DHCP Client Allowing Automatic Configuration
  
• Verifies Connectivity Across a LAN or WAN by Transmitting/Receiving Pings
  
• Measure Packet Response Time to Determine Network Performance
  
• Provides MAC Address of an IP Address
  Transmits Link Activation Signal for Port ID
  
• Ability to Store Mulitiple Profiles with Up to Eight IP Addresses per Profile
  
• Web Browser or Keypad Configuration Ability

LanScaper Network Tester

The new LanScaper Network Tester is the first in a new line of Physical Layer Network Management Devices. The LanScaper combines the functions of a cable tester and length measurement device with the capability to monitor and correct network problems connected with the physical layer and link conditions of the network.

• Identifies port services like Ethernet, ISDN, POTS and Token-Ring while reporting such crucial information as network speed, capability and location of switches and other network devices.
  
• Pinging function verifies connectivity to network devices and queries PC/NICs. 
  
• Detects legacy Phantom Power, reports current and voltage capability of analogue telephone lines, identifies (maps) remotes while cable testing 
  
• Conducts link tests to ID speed
  
• Verifies functional speed capability of terminated unconnected cable runs by sampling data packets between two LanScaper units, which exercises the run and reports the result 
  
• Automatically accesses DHCP host and obtains network information 
  
• Tests cabling configuration and verifies connectivity and length of run while conducting tests for opens, shorts, miswires, split pairs, and reversals 
  
• Identifies HUBs, NIC, or auto MDI/MDI-X devices 
  
• Blinks HUBs to ascertain connected configuration 
  
• Displays advertised network speed/duplex 
  
• Measures and reports any voltage on lines 
  
• Wiremaps network connections with remote identifiers 
  
• Generates multiple tone levels for signal tracing and cable identification
  

LanScaper is also available in a kit bundle including 8 office identifiers and a high sensitivity tone probe