Resi-Tester (TP300) is the first identifier and verification tester designed exclusively for all the wiring environments found in Home Networking and Home Automation. CATV, telephone systems, audio cable, security/alarm wiring, and network cabling can all be tested and located using the Resi-Tester and optional room identifier sets.
Multiple input ports and included adapter cables mean any wire can be attached and tested! Resi-Tester displays cabling results using a large easy to read LCD with clear concise information showing all the faults connected with the various cable types.
It warns of voltage on lines and shows a Pass or Fail message after each test. The built-in tone generator sends a signal down installed wires, so that they can be traced in the walls and their exact terminus identified.
The built-in remote will identify individual outlets whether they are phone, cable or data network. Using the optional multi-identifier sets, the user can verify connections on up to 20 coax outlets and 20 paired cables simultaneously for wire-mapping the largest jobs easily and efficiently.
ResiTester is available on its own or bundled with a tone generator and probe for cable tracing and dial tone simulation of telephone lines. |
;)
;)
;)
;)
