LANPRO

LanPro 2 in 1
Our best selling budget LAN cable tester. Now with multimeter functions!

WireScope™ Pro – An Expandable Platform

Providing the fastest Category 6 cable and fibre certification on the market, the WireScope™ Pro is designed to meet present and future cabling standards. WireScope™ Pro supports cable certification to TIA Categories 3 to 6, Augmented Category 6 and Category 7 limits, and ISO Classes C through F.

The WireScope™ Pro provides investment protection because it grows with its users’ needs, offering a lower cost Category 6 product and supporting upgrades later as needed.

Unique Alien Crosstalk Test Method

In combination with Agilent's newly developed Alien Crosstalk (AXTalk) Stimulators, the new SwiftAXT method implemented in the WireScope™ Pro secures critical cable installations and upgrades. It employs a new, extremely fast and cost-efficient field test methodology for AXTalk, based on real life conditions.

• Fastest Cat 6 Autotest in >8 seconds
• Fastest Cat6A/7 Autotest in >15 Seconds
• Full colour touch screen
• Entry level cat 6 only version or full cat6A cat7 version
• Software licence only upgrade to Cat6A/7 Version
• Only Efficient Alien Crosstalk Measurement for field testing with optional AXT stimulators
• Automatic probe detection
• Cat7 link and channel smartprobes for Siemon Tera and Nexans GG45 connectors
• 1Ghz bandwith offers 50% headroom over cat6A and 40% over cat7 requirements
• New Bi-Directional fibre smartprobes improve fibre testing efficiency
• supports talk set over coppper or fibre
• Automatic software update over web
• Full Vector Network Analyzer capabilities allow advanced diagnostics for pin-pointing failures along the cable run.
• ETL Certified to exceed TIA  level IV Accuracy

Validator

• Tests to TIA 568/570 interconnect standards
• Certifies CAT5, CAT5E, and CAT6 cables to be IEEE compliant to 1 gigabit speed
• Tests coax, telephone, audio, and security cables
• Powerful Plan-Um™ design software included
• Creates and prints job reports
• Wiremap new or existing cable systems
• Simple to use

Validator NT

The new Validator NT from Test-UM offers the network professional a simple affordable method of testing LAN cabling and active IP network components in a single integrated test platform.

Validator NT includes all the cable test features of the standard Validator, but combines this technology with a very powerful IP test platform for PING testing IP devices, discovering IP devices attached to the LAN and verifying internet connecti

With the accompanying Plan-UM software utility, pre-defined templates make it quick and easy to provide network cabling diagrams and network topology diagrams, further improving the quality of network documentation

• Supports IEEE 802.3 data speed carrying specifications to 1 gigabit Measures cable length and distances to opens and shorts using advanced TDR technology Tests telephone, coax, security/alarm, cables for continuity, proper termination and polarity Tests shielded or unshielded Cat3, 5, 5E, 6 Wiremaps individual runs to locate and identify cable routes
• Tests interconnect specifications per TIA 568/570, including opens, shorts, miswires, split pairs, etc.
• Active network capabilities for test, link and identification
  • Port Services
  • Ping Testing
  • Hub Flash
• Cable Quality Tests
  • SKEW NEXT—All combinations on all pairs (12) Channel Response Echo Testing (Return Loss) impedance mismatches Signal to Noise Ratio Attenuation Amplitude Return Loss
  • Bit Error Rate (BERT)
• Measures signal quality in actual link environments that could account for cable inadequacies, such as physical installation problems, kinks, loops, physical terminations, dry shorts, or miswires. Store data on either a laptop/PC or in flash card memory up to 2 GB. Use archived info when upgrading or changing previously installed systems.

LanRoamer

TP500 LanRover from Test-UM offers a new price/performance level for verification of wiring faults and configurations on all your voice and data cabling. With an inbuilt signal tone generator, wiremapping and cable tracing individual cable runs is simple.

Features  

• Cable test results displayed on main unit and remote unit in less than 2 seconds after plugging in the cable  
• Auto-on and auto-off—when testing cables, just plug both ends into tester!
• Snap-together case for easy storage and convenient patch cable testing
• Tone generator mode for use with tone tracers, auto-off
• Debug mode with from/to and failures for each pair
• Test for short, opens, miswires, reversals, and split pairs  
• Battery low indicator

LanRoamer PRO

This high-performance length measurement twisted pair cable tester identifies multiple faults clearly without interpretation for fast results; clear wiremapping form displayed on 2-line, 16-character LCD display; and measures cable length

• Measures cable length as a stand-alone function 
• Test for short, opens, miswires, reversals and split pairs 
• Identifies multiple faults clearly without interpretation 
• Clear wiremapping form displayed in 2-line, 16-character LCD display 
• Auto-off/Auto-on. Up to 10 times better battery life than other testers 
• One-ended testing with Pre-test mode for fast results 
• Built-in tone generator with selectable tones and pair capability

LanRover Pro is available on it’s own and as Kit Bundles, including optional office identifiers and high sensitivity tone probe.

LanCaster

• Indicates all common wiring faults including split pairs
• Shows which end of the installed link contains the fault
• Rugged Palm-Top design weighs less than 350g
• Cable length meter, Tone generator and Service Indicator
• Complete with 1 active Remote unit and test leads
• Up to 16 unique Active Remote units / Office Identifiers

LanCaster Pro ST

The Lancaster Pro ST is a low cast wire map tester which tests and certifies structured cabling continuity to TIA568A/B, USOC and ISDN standards.

The Lancaster Pro ST displays on-screen wiring configurations showing the length of all 4 pairs and length of pair to fault up to 150m (500ft).

The Lancaster Pro ST will store up to 1000 test results which can then be downloaded to PC using the Lancaster Pro ST software (provided). Test results can then be customised with your corporate identity and certificates produced displaying customer's location/job length, cable VP and testing standard.

Maintaining all the proven features of the standard LanCaster, the Pro ST identifies all common faults on wiring Schemes, installed TIA568A/B, USOC and ISDN Standards, including open circuit wires, shorted pairs, shorts between pairs, crossed pairs, split pairs, pair reversals and shield/screen continuity. In addition, the Lancaster Pro ST has a large backlit screen.

As with the standard Lancaster, the Pro ST can check installed wiring networks, alerting the operator if any telephone services are active on the cable under test and can test for and indicate any other active services (10MB/s, 100MB/s, Token Ring etc) to prevent accidental testing of a live network. In addition, a built-in tone generator (oscillator) transmits a warbling tone into the cable enabling detection and tracing using a standard probe receiver.

LanCaster Pro ST Features

• Certifies cable continuity to TIA568A/B
• Records 1000 test results
• Large 128 x 64 pixel LCD with backlight
• Multi-lingual customisable certification software
• Displays time and date for recording test data
• Measures length of all 4 pairs
• 150m (500ft) measuring range
• Voltage warning and test inhibit
• Indicates all common wiring faults inclduing split pairs
• Measures and identifies length to fault
• Instant graphical display gives unambiguous fault indication
• Rugged palm-top design weighs less than 390g
• Complete with 1 active remote unit and test leads
• Up to 16 unique intelligent remote units/office identifiers
• Up to 7 hours continuous battery life
• Supplied with carry case
• Scratch resistant display
  

FaultCaster

• Low Cost Full Specification Professional Digital TDR
• Measures Distance to Open or Short Circuit Faults
• Extended Measuring Range to 2000m on all cable types
• Fast-Edge Step TDR Technology for improved range and resolution
• Voltage Warning and Test Inhibit
• Incorporates a Tone Generator for use in Cable Tracing and Identification
• Rugged and Compact at 350g
• Water and Dust Proof to IP54
  

Supplied complete with test leads and tool belt holster
FaultCasterTM is a professional hand-held Digital Time Domain Reflectometer built to suit the needs of all communications engineers and technicians, telecom fault teams and contractors to the communication industries. It is designed to detect and locate faults on all types of cable up to a distance of 2000m

Fast-Edge Step TDR technology enable the FaultCasterTM to identify opens and short circuits, and directly indicate the fault distance on an alpha-numeric LCD, with better range and resolution than existing products.

An internal library of standard cable types enables accurate measurements on cables without the necessity of entering Velocity Factor information.

In the event that the FaultCasterTM is connected to a live cable a warning will be displayed, and alarm tone sounded and testing inhibited.

The FaultCasterTM incorporates an oscillating tone generator, that is detectable using a standard tone probe, for use in the tracing and identification of pairs within a cable.

It is housed in a tough, ruggedised ABS plastic moulding, water and dust proof to IP54, and supplied complete with test leads and a protective tool-belt holster.

The FaultCasterTM is designed and manufactured to international standards for quality, safety and reliability.

Testifier

The new Testifier produces the most accurate and easy-to-understand results of any cable tester/verifier on the market. Its large LCD display is easy to read and it shows a clear picture of a wired cable: data, coax, telephone, security/alarm, or unterminated site wire. It tests them all!

Condition: Testifier shows Opens, Shorts, Miswires, Split Pairs, PASS and FAIL results fast—on a clear, full alpha/numeric LCD display.

Location: Testifier is supported by the most comprehensive set of wiremapping locators in the world. Up to 20 cable end locations at a time can be identified and tagged.

Position: Testifier’s built-in tone generator is the most flexible and function-packed tone generator you will ever use. Its configurable signal can be generated to find and fix the position on any type of cable—either exposed or hidden, in ceilings or behind walls

Quintest

• Low cost structured cabling Wire Map tester
• Test and verifies 2,3 & 4 pair voice and data wiring
• Compact design weighs less than 175g
• Sequencing LED display indicates cable fault ends
• Units snap together with magnetic clasp for protection
• Auto power off and low battery indication