
|
Tone & Trace Field Kit |
The Test-UM KP100 is a tone and probe kit containing the Test-Um Tone Generator, TG100 and the Tone Tracer, TT100. For convenience in the field the tracer and generator are housed in a tough Cordura pouch with belt loop. The kit also includes one cord set with alligator clips.
- Three built-in tones, one steady and two warbles for multiple line testing
- Constant tone amplitude over the life of the battery means accurate and traceable tones, even at the end of the battery life
- Two tone amplitude levels, normal and half, let the user extend the tone reach
- Auto-off function to protect and prolong battery life
- Tone may be added to any mode for using phone sets without monitor mode
- Separate Talk Battery mode for increased voltage and power for test sets
- Modular jack allows multiple cord sets to be used for different applications
|
| | more info | |
|
|
High Powered Tone & Trace Field Kit |
KP105 from Test-UM is a high poered tone and probe kit containing the higher powered Test-Um Tone Generator TG200 and the Tone Tracer, TT100. For convenience in the field the tracer and generator are housed in a tough Cordura pouch with belt loop. The kit also includes one cord set with alligator clips.
- Extra-long-distance capability. Detect tone up to 20 miles away
- Constant amplitude output for 100% signal strength all the time, no signal decrease as battery discharges
- Easily hear signal through walls and enclosures
- Multiple tones and power levels for all applications - CAT 5/6, signal wire, coax, telephone cable
- Unbalanced tone mode for longer distances on CAT 5/6 cables
- Auto-off for battery conservation
- Full talk battery and constant polarity check included
- Includes adapter cables and carrying case
- Alligator Clips
|
| | more info | |
|

|
CableTracker |
Toning an active LAN circuit can disrupt network traffic and is difficult to track due to cable twist and tone bleed.
The CABLETRACKER Network Tone and Probe Kit features a Port ID function that blinks the link light verifying cable connectivity.
This feature also provides a simple and effective method to identify switch or hub port assignments on active networks.
Three different blink rates are provided to ensure compatibility with equipment from a wide range of manufacturers.
Traditional toning with two different tone frequencies and patterns is provided for non-active circuit tracing
- Non-conductive probe tip
- Power On indicator
- Volume Control
- Ergonomically Designed Activate Link Lights to Identify a Connected
- Hub or Switch Port
- Transmits Four Audible Tones
- RJ-45 Male or Female Connection
- Detachable DMM Alligator Clips
- Detects Short in Tested Wire Pair
The CABLETRACKER Network Tone and Probe Kit model CTK1015 is designed for network managers and technicians. |
| | more info | |
|

|
Talk & Trace |
| The new Talk & Trace hands-free personal communications test set that can be used in any wiring environment. The kit allows technicians at either end of a cable to communicate whilst tracing individual conductors. Verification of the correct conductor is identified by the unique inbuilt continuity ringer which is activated at both ends simultaneously. |
| | more info | |
|