For PC repair and upgrading, IT Training,
A+ Hardware Certification and core hardware testing, Pc-Check
gives you over 500 tests from 1-single disk confirming reliable
hardware for on-going software success. Since 1986, still
the hardware 'testers' choice for fully functional, stand-alone
software diagnostics. Pc-Check
offers ease of use coupled with comprehensive diagnostic testing.
Both commercial and individual PC users can quickly identify
and correct PC problems, and review hardware configurations and
performance.
Pc-Check‘s
advanced diagnostic menu provides precise error identification of
both fixed and intermittent faults of all major hardware components.
Pc-Check ’s
extensive range of tests can be selected for either single-pass,
or continuous burn-in testing. Over twelve command line test combinations
are available, including interactive tests with Loop-Back Plugs,
POST cards, Status Indicator Boxes (S.I.B.s) and error logging to
file. The Eurosoft Script Program (E.S.P.) allows you to write your
own test test commands to integrate with your existing test routines.
Extensive
system information, such as DOS memory mapping of loaded device
drivers and CMOS editing in two functional areas means that the
installation or reconfiguration of hardware can be achieved easily
and quickly. Full analysis of all memory areas, cache sizing and
hard & floppy drives allows straightforward and rapid determination
of performance and upgrade requirements.
Competition
beating memory testing, perfect for any PC – desktops, servers,
portables, industrial and remote – Pc-Check saves you time and
money! Pc-Check has a special self-booting program so you can
safely avoid boot sector viruses and work independently of operating
systems such as Windows or even Unix. Test results can be easily
printed to a file or printer.
Pc-Check
is updated continuously as new PC hardware comes on to the market.
Our UK based in-house R&D team stays current with technology,
allowing our customers to benefit from newly introduced functionality
such as intelligent test cycles, multimedia analysis and current
system identification. The upgrade subscription program makes sure
our customers are kept up-to-date with the latest hardware tests
Pc-Check Package
System Requirements
About Pc-Check Diagnostic Software
- Customer test favorites: PXE Network boot, 64-bit processor
testing, XML comparison feature, memory testing over 4GB.
- Independent testing, fully self-booting, no installation
of operating system required
- Easy-to-use hardware tests check all PC components are
running reliably
- Validate prototype and pre-production hardware during
original equipment development
- Current hardware tests ensure PCs are built, upgraded
and repaired correctly, regardless of brand
- Core system testing maximizes component reliability
and working system integrity
- Hardware add-on test options enhance troubleshooting:
smart USB Preferred Port Plugs, new DVD Test Disc, CD-ROM
Test Disks, Preferred PCI/ISA POST board
- Reduces expensive field service calls, 'No Trouble Found'
(NTF), wrongful product returns, overstocking field service
products
Product Overview
Specialist Features
System Asset Configuration
Component Testing
|
Memory (stick)
Inversion tree (ID refresh & cross-links bits)
Progressive inversion (locates trapped bits)
Chaotic addressing (module stressing)
Block rotation, module-by-module (extends address &
cross-links)
Optional user pattern (write all memory; choice of 32
bit repeats)
|
Memory
Integrated & external cache memory
Cache fault detection algorithms
Auto-repeat without Burn-in mode
L2 cache test for 386+ & Pentium II+ Pinpoint faults
(RIMM module in Bank 0)
Refresh and address line
|
|
IDE Drive (1 to 4)
Mechanic stress testing
Non-destructive read/write
Destructive write tests
Controller diagnostics
UDMA (66/33/100/133)
48bit addressing
Read verify
Time Testing
HPA
|
Floppy Disk Drive (1 to 2)
Write protect, disk change
Read/Write tests
Controller diagnostics
CD-ROM Drive
Butterfly seek, reset and media tray eject
|
|
USB
UHCI & OHCI
USB information
Device listing (all devices & particular ports)
External PortPlug*
|
Serial Ports (maximum 4)*
Handshake signals, interrupt generation
Individual pin testing
IRQ display
FIFO exercise
External Loop-back (1- 25 & 2- 9 pin serial)
|
|
Parallel Ports (maximum 3)*
Controller diagnostics
printer output- Status port
Interrupt generation
Controller testing
Individual pin testing
IRQ display, EPP & ECP port support
External Loop-back (1- 25 pin parallel)
|
Motherboard
DMA controller, CMOS settings
PCI
CMOS RAM, real-time clock, system timers
Interrupt controller
keyboard controller
|
|
Video Adaptor
Monitor alignment linearity and dead LCD pixels
Video memory, character set & attributes
Mode menu for VESA
Test cards, High/True colour, Check Gamma, and Check
colour linearity
|
Keyboard & PS/2*
Full functionality test, controller signals Scan codes,
LEDs, key operations
|
|
Mouse*
Driverless testing
Operations, 2 or 3 button
Text and graphics modes
|
Processor & Co-processor
Type identification & testing
MHZ Monitor
Full 3D-NOW! SSE/SSE2 and MMX instructions testing
Multi-Processor type identification & testing
|
|
Multimedia
Sound card, FM & sampled audio tests
Driverless CD-ROM/DVD analysis to 66x
|
ATAPI Devices
LS-120, Zip drives
Magneto optical cartridges up to 128Mb
|
|
Modem (1 to 4)
Writable registers
Generates carrier & dialing tones
Internal analogue loop-back
*Interactive
tests may require optional hardware purchase
|
|
PC
Check and CD Check are trades mark of Eurosoft UK Ltd
|