The UK's Premier Supplier
of
PC Diagnostic Hardware & Software
for
PC Professionals

HOME > Pc Testing > PC Check > Accessories

STOP PRESS!

NEW VERSION 6.01 OUT NOW

INCLUDES USB TESTER!

Latest Version 6
Check It Out - All the latest features

Pc-CheckŪ brochure in PDF format

FREE
DEMO
PROGRAM

USB Preferred Port Plug (UP-3)

USB Preferred Port Plugs are used during all PC building and maintenance services. Each USB Port Plug quickly determines communication and USB port reliability when used with Eurosoft's diagnostic software.

Quickly determine communication and USB port reliability
Allows individual or multiple USB port testing to reduce test and process times
Device listing (all devices & particular ports)
Port Plug (switching ports & communication)
System-level testing for any PC with up to 4 Host Controllers
Up to 60 root hub ports can be tested at one time
Over 10,000 lines of intelligent testing code in each Port Plug (not a dumb terminal)
Activate both OHCI and UHCI protocols (works with all compatible chipsets)
Supports USB specifications 1 & 2
Includes 1 USB Port Plug with Keyring-style grip
Programs Supported: Pc-Check & Virtual Pc-Check

CDROM Test Disc (CDT)

CDROM Test Disks are used throughout PC, CD-ROM and DVD component builds, and enterprise storage, for stringent drive data analysis. Each CDT delivers effective, unique test data to thoroughly test any CD-ROM or DVD drive.

Fully test and measure the information sectors of a CD-ROM for accurate performance
Supports DVD drives
Each test disk delivers over 600MB of carefully arranged test data guaranteeing reliable CD-ROM/DVD drive operation
Test one or up to 24 CD-ROM drives at one time, including storage servers and jukeboxes when using CD-Check.
Includes 1 CDROM Test Disk
Programs Supported: Pc-Check, Virtual Pc-Check & CD-Check

Status Indicator Box (SIB)

Status Indicator Boxes are used during PC building and maintenance as 'monitor' substitutes. Each SIB displays a PC's test status without monitors or displays being attached.

Saves valuable PC building and maintenance space
Portable and convenient test displays
Displays PASS/FAIL/TESTING position of each PC with 3 LED test indicator lights (green, red, yellow)
View diagnostics and tests without monitors
Includes 1 SIB with 9 pin-parallel port connector; size 10x5cm; sturdy, plastic case.
Programs Supported: Pc-Check, Virtual Pc-Check

Audio Test-loop Cable (ATC)

Audio Test-loop Cables are used during all PC building and maintenance service points. Each ATC determines the frequency response and connectivity of audio sub-system components.

Performs speaker-less interaction signals for LINE OUT/IN and/or MIC IN jacks (speakers not required)
Compares standardized sampling rates at 11.025 kHz, 22.05 kHz, and 44.1 kHz including PCM recording
Durable audio port testing cross-checks connections for each speaker or microphone jack installed
Measures the overall gain of a sound system
Checks reliability of the DC offset voltage for input amplifiers
Determines audio frequency bleeding of defective circuitry
Verifies balance, cross-talk, distortion, CD audio and muting
Supports stereo/full-duplex and older half-duplex systems
Includes 1 Audio Test-loop cable; size 21.4cm, dual 8 Ohm stereo cable
Programs Supported: QA+FE Service Center, VirtualQA+ & Pc-Builder Suite

Loop-back Plug (LBP)

Loop-back Plugs are used across all PC building and maintenance services. Each LBP determines the reliability and connectivity of PC parallel and serial ports.

Performs critical peripheral 'handshake' signals for FIFO, EPP & ECP ports, controller diagnostics, printer output, MODEM and more
Durable test pins cross-check connections for individual pin use, status ports, IRQ display and more
Includes 4 loop-back plugs (1- 25 pin parallel, 1- 25 pin serial, 2- 9 pin serial plug); size 5cm2
Programs Supported: Pc-Check, QA+FE Service Center, VirtualQA+, Virtual Pc-Check & Pc-Builder Suite

PC Check and CD Check are trades mark of Eurosoft UK Ltd

©1996-2007 Expodata Systems Ltd. All rights reserved